Metered Rack Power Distribution Unit (PCI-PDU-MVS54)
The Paya co. Metered Rack Power Distribution Unit (PDU) distributes power to devices in the rack. It has a sensor that measures the current that it and its attached devices use. It can be monitored through Web, SNMP, SSH, or Central Monitoring interfaces.
Outlets. The Rack PDU has twenty-four (24) IEC-320-C13 and six (6) IEC-320-C19 locking outlets.
Overcurrent protection. The Rack PDU has two (2) 20 A, 1-pole hydraulic-magnetic circuit breakers.
Display interface. The liquid crystal display (LCD) and input buttons allow you to monitor current, power, and voltage measurements of the Rack PDU. Remote communication can be established through the Ethernet port. The PDU ports enable data transfer to other PDUs. The environmental sensor port allows for monitoring of the temperature and humidity of the room or enclosure.
Power cord. The 3.0m (10ft) power cord terminates with a 32A, 3-pin IEC-309 connector.
Toolless mounting. The Rack PDU has two toolless mounting pegs for 0 U mounting capability in a rack or enclosure.
Overview and Specifications
❶ Magnetic circuit breakers
❷ Twenty-four(24) IEC-320-C13 outlets
❸ Six(6) IEC-320-C19 outlets
❹ Graphical LED
❺ Two(2) input buttons
❻ Ethernet network port
❼ Two(2) PDU expansion ports
❽ Two(2) temperature & Humidity input ports
❾ Alarm output port
❿ Four(4) digital input signal ports
⓫ Two(2) Transistor alarm output ports
⓬ 3-Pin IEC-309 connector